Mitsubishi Outlander PHEV 2019 Manual page 197

Indication lamp, warning lamp, and information screen display list
Screen
6
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
Screen
6-50 Instruments and controls
Cause
l The accelerator pedal has been depressed
when the select position is in the "N"
(NEUTRAL) position.
l The selector lever has been operated when
the select position is in "P" (PARK) posi-
tion and the brake pedal is not depressed.
System operation status
l When charging of the drive battery is
completed.
l When "NORMAL" mode of S-AWC is
selected
OGGE19E1
Solution (Reference)
l When you start the vehicle, be sure to
check the select position indicator and
make sure the select position is in the "D"
(DRIVE) or "R" (REVERSE) position.
Then, please depress the accelerator ped-
al.
Refer to "Select position indicator" on
page 7-17.
l Operate the selector lever while depressed
firmly on the brake pedal.
Reference
Refer to "Charging" on page 3-02.
Refer to "S-AWC drive mode" on page 7-21.