Switches; Forward Collision Mitigation (Fcm) (If Equipped); Power Liftgate Main Switch (If Equipped) - Mitsubishi 2015 OUTLANDER Owner's Handbook Manual

Active Stability Control (ASC) Off Switch

Power Liftgate Main Switch (if equipped)

When the power liftgate main switch (located in the
lower center dash area) is ACTIVE, the power liftgate
can be operated using either the power liftgate switch
on the F.A.S.T.-key, the driver's side power liftgate
switch or the open/close switches on the power
liftgate.
Power Liftgate Switch (if equipped)
You can deactivate the system by
pressing down the "ASC OFF" switch for
3 seconds or longer.
When the ASC is deactivated, the
display/indicator will turn on. To
reactivate the ASC, momentarily press
the "ASC OFF" switch; the display/
indicator is turned off.
The power liftgate can be opened by
pressing the Power Liftgate Switch.
Lane Departure Warning (LDW) Switch (if equipped)
When you press the LDW switch, the "LDW" indicator on the
information screen of the multi information display turns OFF
and the LDW system is inactive.
Press the switch again, the system will activate.
Forward Collision Mitigation (FCM) Switch (if equipped)
Every time the operation mode is turned to "ON", the FCM
will automatically be turned on.
To turn off the FCM, press and hold the FCM switch. A buzzer
will sound and the "FCM OFF" message and
indicator will appear in the multi information
display.
To change the warning distance mode, briefly
press the FCM switch.
7

SWITCHES