Mitsubishi Outlander PHEV 2019 Manual page 392

Settings Settings val- Settings con-
name ue tent
CT OFF Do not up-
date the time
even if time
data is re-
ceived.
*: It is necessary to press the [TP] key and
turn traffic message standby mode
"ON".
Time Setting
Turning the RDS setting CT setting "CT
OFF" enables manual setting of the time.
1. Select "YES" at the "Adjust time"
screen, and press the /SEL key.
The hour can be adjusted. Press the
/SEL key again to adjust the minutes.
2. Turn the /SEL key to adjust the time.
3. Press the /SEL key.
This completes the adjustment.
NOTE
l In order to finish adjusting the time, hold
down the /SEL key until the seconds are
reset to "00".
PHONE Settings
Change the mobile phone voice cut- in set-
®
tings and the Bluetooth 2.0 interface lan-
guage.
Depending on the vehicle, PHONE settings
may not be possible.
NOTE
l Cancel functions such as the mobile phone
"dial lock", and connect while on the stand-
by screen.
l While connected, mobile phone (receiving
calls, etc.) operations may not function cor-
rectly.
l Depending on the distance between the
product and the mobile phone, the condi-
tions within the vehicle, and types of screen-
ing, connection may not be possible. In these
cases, situate the mobile phone as close as
possible to the product.
l Even though a Bluetooth-capable mobile
phone, characteristics and specifications
may mean that correct operation may not be
possible.
l For safety's sake, do not operate the mobile
phone while driving. When operating the
mobile phone, first stop the vehicle in a safe
location.
l
Even though a Bluetooth-capable mobile
phone, phone specifications and settings
may result in differences in display, or pre-
vent correct operation.
OGGE19E1
System Settings
NOTE
l Some models may not be confirmed as con-
nected, or may not connect.
Supported profiles
Hands-free HFP(v1.5)
Phone book trans- OPP(v1.1),
fer PBAP(v1.0)
Vehicles without a Bluetooth
2.0 Interface
A hands-free kit (available separately) is re-
quired.
("Set value" bold typeface indicates factory
default settings.)
Settings value Settings content
PHONE OFF Do not use mobile phone
voice cut-in.
PHONE MUTE During mobile phone
voice cut-in, mute the au-
dio.
PHONE ATT During mobile phone
voice cut-in, output audio
from all speakers.
For pleasant driving
®
8
8-47