Mitsubishi Outlander PHEV 2019 Manual page 274

Refer to "To resume the set speed" on page
7-50.
To deactivate
E00609702955
The set speed driving can be deactivated as
follows:
l Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
l Press the "CANCEL" switch (D).
l Depress the brake pedal.
The set speed driving is deactivated automat-
ically in any of the following ways.
l When your speed slows to approximate-
ly 15 km/h (9 mph) or more below the
set speed because of a hill, etc.
l When your speed slows to approximate-
ly 40 km/h (25 mph) or less.
l
When the Active Stability Control
(ASC) starts operating.
Refer to "Active stability control (ASC)"
on page 7-43.
OGGE19E1
Cruise control*
WARNING
l Although the set speed driving will be de-
activated when shifting to the "N" (NEU-
TRAL) position, never move the selector
lever to the "N" (NEUTRAL) position
while driving.
You would have no regenerative brake
and could cause a serious accident.
CAUTION
l When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by a MITSUBISHI
MOTORS Authorized Service Point.
NOTE
l You cannot operate the regenerative brake
while the adaptive cruise control system
(ACC) is operating.
l If you perform the following operation, the
buzzer may sound and the select position
may automatically shift to "N" position.
• The electrical parking switch is pressed
during driving.
• The selector lever is shifted to "R" during
driving forward.
• The selector lever is shifted to "D" during
driving backward.
Starting and driving 7-49
7