Mitsubishi Outlander PHEV 2019 Manual page 282

CAUTION
• Do not cover the sensor mounted area
(shaded area as shown in the illustration)
with a sticker, licence plate or anything
such as a grill guard, etc.
• The sensor front cover should not be
modified or painted.
• Avoid using different size tyres from
those specified and maintain even tyre
wear.
• Do not modify the suspension of your ve-
hicle.
CAUTION
l When the cover in front of the sensor or the
sensor is deformed by an accident, please do
not use the ACC and contact
MITSUBISHI MOTORS Authorized Serv-
ice Point.
NOTE
l You cannot operate the regenerative brake
controls while the ACC is operating. If do-
ing so, the buzzer sounds.
l If you turn on the ACC when the select posi-
tion is in "B" (including B0 to B5) position,
the select position is changed to "D" posi-
tion.
When ACC detects no vehicle
in front within the set distance
Your vehicle runs at a speed to which you set.
It is possible to set the speed between ap-
proximately 40 km/h (25 mph) and 180 km/h
(112 mph).
NOTE
l If the vehicle speed exceed the set speed on
down slope, the system automatically ap-
plies the brake to maintain the vehicle speed.
OGGE19E1
Adaptive Cruise Control System (ACC)*
NOTE
l When depressing the brake pedal while auto-
matic brake is applied, the brake pedal is felt
a solidly, but it is not abnormal. You can more
depress the pedal and it provides greater
braking force.
l Sound is heard while automatic brake, but it
is operated a brake control and not abnor-
mal.
When ACC detects a vehicle in
front within the set distance
The ACC makes control to maintain a fol-
lowing distance (time gap) matched with the
vehicle speed between your vehicle and a ve-
hicle in front while also activating brakes as
necessary.
If the vehicle in front stops, the ACC reacts
to it by stopping your vehicle.
Depress the brake pedal as soon as your vehi-
cle comes to a stop.
Starting and driving
7
7-57