Eco Mode Switch; Fog Lamp Switch - Mitsubishi Outlander PHEV 2019 Manual

ECO mode switch

NOTE
l If the switch is used for a long period while
the ready indicator is not illuminated, the
auxiliary battery could go flat and the Plugin
Hybrid EV System could be impossible to
start.
l While the hazard warning lamps are blinking
due to having manually pushed the switch,
the emergency stop signal system does not
6 operate.
Refer to "Emergency stop signal system" on
page 7-39.
ECO mode switch
ECO mode is an eco-driving support system
which automatically controls the Plug-in Hy-
brid EV System and air conditioning system
to improve fuel efficiency.
When the ECO mode is active, your vehicle
will slowly accelerate even when you press
the accelerator pedal.
Refer to "Automatic climate control air con-
ditioner" on page 8-06.
The ECO mode starts working by pressing
the ECO mode switch when the operation
mode of the power switch is in ON. Push the
switch again and the ECO mode will cancel.
6-68 Instruments and controls
While the ECO mode is working, an ECO
mode indicator will be turned on.
E00531801270 NOTE
l Even if the ECO mode is selected, after turn-
ing the operation mode of the power switch
OFF and turning to ON again, the ECO
mode is set to OFF.
l
Even if the ECO mode is operating, you can
select normal operation of the air condition-
er.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS), it
is possible to change the setting by means of
screen operations.
Refer to the separate owner's manual for de-
tails.
OGGE19E1

Fog lamp switch

E00506700034
Front fog lamp switch
E00508301754
The front fog lamps can be operated while
the headlamps or tail lamps are on. Turn the
knob in the "ON" direction to turn on the
front fog lamps. An indication lamp in the in-
strument cluster will also come on. Turn the
knob in the "OFF" direction to turn off the
front fog lamps. The knob will automatically
return to its original position when you re-
lease it.