Evaluate System Activity And Performance; Retrieve Statistics; Table 3-2 Status Leds - Cisco 678 Installation And Operation Manual

Evaluate System Activity and Performance

Evaluate System Activity and Performance
Table 3-2 Status LEDs
LED Label Full Name
WAN-LNK WAN Link
WAN-ACT WAN Activity
LAN-LNK ATM25 LAN Link
LAN-ACT ATM25 LAN Activity When this light blinks, it indicates activity on the ATM-25
PWR Power Light
ALARM Alarm Light

Retrieve Statistics

Cisco 600 Series Installation and Operation Guide
3-20
Table 3-2 describes the LEDs and their status.
Description
When this light is ON, it indicates that a link has been
established on the WAN port. The WAN-LNK light blinks
steadily during ADSL line training activities. When the light
is solid, the system is connected and trained.
When this light blinks, it indicates that the WAN port is
transmitting or receiving data.
When this light is ON, it indicates that a link has been
established on the ATM-25 port.
Note
port.
When this light is Green, the system is ON and working
correctly.
When the light is Red, the system is ON but indicates a
problem that needs to be resolved.
The stats command shows information about the number of packets transmitted
and received and activity information about general applications.
Chapter 3 Configuration Procedures for the Cisco 627
For some ATM-25 routers or NICs, this light may not
be on till data is sent to the modem.
78-11190-01