Connect Cables To The Cpe; Figure 2-9 Cisco 678 Splitterless Configuration - Cisco 678 Installation And Operation Manual

Chapter 2 Installation Procedures
Figure 2-9 Cisco 678 Splitterless Configuration
Telephone
NID
Note

Connect Cables to the CPE

78-11190-01
Microfilters
Microfilter
The microfilters do not work if connected improperly. For
connection instructions, see
Specifications."
This section describes how to connect cables to the CPE and to your telephone and
computer systems.
Microfilter
Data Ethernet
Hub
Cisco 678
Appendix C, "EZ-DSL Microfilter
Cisco 600 Series Installation and Operation Guide
Set Up the Hardware Environment
2-13