Appendix C
EZ-DSL Microfilter Specifications
Caution
Installation Instructions
Step 1
Step 2
Step 3
Step 4
Safety Precautions
Warning
Warning
Wall-Mount Microfilter
78-11190-01
The in-line microfilters do not provide protection against transient
noise for multi-line telephones, nor do they provide protection
against power surges.
Identify all home telephones plugged in and in service. An EZ-DSL microfilter
should be installed at each home telephone.
Unplug the telephone from the wall. Plug the telephone cord into the end of the
EZ-DSL microfilter marked PHONE.
Using the 3-inch telephone cord provided, plug one end of the cord into the
microfilter marked WALL. Plug the other end of the cord into the telephone wall
receptacle.
After you have finished installation, verify that your telephone service works. If
your telephone service does not work, disconnect the EZ-DSL Microfilter and
contact your local telephone company or Cisco Systems.
Take the telephone handset off the hook while wiring.
Persons with pacemakers should never work with telephone
wiring.
The wall-mount version is a plastic plate used in conjunction with wall-mount
telephones. The wall-mount microfilter installs in the place of normal telephone
jack outlets where the wall-mount telephones are used.
Cisco 600 Series Installation and Operation Guide
Specifications
C-3