Cisco 678 Installation And Operation Manual page 112

Configure Applications
Software Updates
Note
Archives
Using TFTP from a UNIX Machine
Cisco 600 Series Installation and Operation Guide
5-28
Use TFTP to transfer a new software image from Cisco to your Cisco 67x, where
the file name format is: nsrouter.c67ydmt.x.x.x.x.bin or c67ydmt.x.x.x.x.bin. The
x.x.x represents the image version number, and
for example, 677.
If you are upgrading from CBOS 2.2, you must use the
nsrouter.c67ydmt.x.x.x.x.bin filename format. If you are upgrading
from CBOS 2.3, you can use either format.
Use TFTP to back up a copy of your configuration file before changing it, so you
can easily recover the old file when necessary. The naming conventions for the
configuration file are:
When using the put option of the tftp command, you must name the file
•
nscfg.cfg.
When using the get option of the tftp command, name the file any name that
•
a standard text editor can view and edit.
For information on the UNIX TFTP client, access the online manual by entering:
man tftp
The manual page for TFTP appears.
To upgrade the Cisco 67x image:
root@staten-</67x>tftp
tftp> mode binary
tftp> put 12.0.8.5:nsrouter.c67
Sent 923574 bytes in 60.8 seconds
Chapter 5 Configuration Procedures for the Cisco 67x CPE Devices
x
dmt.2.3.5.012.bin
y is your CPE model number,
67
78-11190-01