Cisco 678 Installation And Operation Manual page 56

Configure Management Virtual Connections
A display similar to the following will appear on your screen:
atm1
Status:
Configured:
Actual:
Last Line Fault:
ATM Statistics:
DSL Statistics:
Cisco 600 Series Installation and Operation Guide
3-4
RFC1483 Ethernet HWaddr 00:E0:D0:01:19:7F
IP address 10.0.1.1 Mask 255.255.255.0
MTU 1500 Metric 0
RX packets 0 errors 0
TX packets 0 errors 0
Port is currently enabled with link status
VCI 34 VPI 2
Severely Errored Frame Count:0
Data rate 6944 Kbps down;
Line capacity 7456 Kbps down;
SNR Margin
Attenuation 13.0 dB; previous 13.0 dB
Last Self-Test Result:Not Available
Modem Microcode:
Trellis Coding:
Echo Cancellation:
FDQ Adaptation:
Rate Adaptation:
Overhead Framing:
Bit-Swapping:
ATM Payload Scrambling: Disabled
PGA-Cutback:
FEC Redundancy Bytes:
Interl. Path: downstream:
Fast Path: downstream:
Interleaver Depth: downstream:
Trellis Coding:
Echo Cancellation:
FDQ Adaptation:
Overhead Framing:
Bit-Swapping:
NONE
Interleaved-Path Counters:
HEC errors:
LOCD events:
Fast-Path Counters:
HEC errors:
LOCD events:
Superframes:
Corrected Superframes:
Uncorrected Superframes:
LOCD Retrains
Chapter 3 Configuration Procedures for the Cisco 627
480 Kbps up
480 Kbps up
8 dB; previous 8 dB
0x1119be0d
Enabled
Disabled
Enabled
Normal
Mode-3
Disabled
0 dB
16, upstream
0, upstream
0, upstream
Not-Used
Not-Used
In-Use
Mode-0 (910 compatible)
Not-Used
0
0
0
0
956
0 (+INF)
0
0
0
0
0
78-11190-01