Cisco Aironet 600 Series Configuration Manual

Configuring the Access Point

This chapter provides the following information:
•
•
•
•
Configuring the Wireless LAN Controller IP Address on the

Access Point

Follow these steps to configure the IP address of the Wireless LAN Controller on your Cisco Aironet
600 Series OfficeExtend access point.
Obtain the IP address of your Wireless LAN controller from your company's IT professional.
Step 1
Access the 600 Series OfficeExtend access point GUI as described in
Step 2
page
Click the Configuration tab.
Step 3
The Configuration page is displayed.
From the Configuration page, click the WAN tab.
Step 4
The WAN page is displayed.
Step 5 Enter the IP address of the primary controller in the Controller IP Address field.
Step 6 Leave the Static IP check box unchecked to allow the WAN IP address to be assigned by DHCP.
Step 7 Click Apply to commit your changes.
A verification screen is displayed.
Click Continue.
Step 8
The 600 Series OfficeExtend Access point will connect to the controller and download the current
software image. Allow the device 5 minutes to download and reboot with the new code and
configuration.
OL-29882-03
Configuring the Wireless LAN Controller IP Address on the Access Point, page 3-1
Configuring Radio Channels on the Access Point, page 3-2
Configuring Personal Wireless LANs, page 3-3
Troubleshooting, page 3-4
2-1.
C H A P T E R
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
3
"Accessing the GUI" section on
3-1