Access The System Admin Vm Console - Cisco NCS 6008 Series Manual

Access the System Admin VM Console

username root
group root-lr
group cisco-support
secret 5 $1$NBg7$fHs1inKPZVvzqxMv775UE/
!
What to do next
• Configure routing functions from the XR VM.
• Configure system administration settings from the System Admin prompt. The System Admin prompt
Access the System Admin VM Console
All system administration and hardware management setups are performed from the System Admin VM.
Step 1 Login to the XR VM console as the root user.
Step 2
(Optional) Disable the login banner on console port when accessing the System Admin mode from XR mode.
a) configure
b) service sysadmin-login-banner disable
Example:
RP/0/RP0/CPU0:router(config)#service sysadmin-login-banner disable
Disable the login banner on console port in System Admin mode.
c) commit
d) end
Step 3 admin
Example:
The login banner is enabled by default. The following example shows the command output with the login banner enabled:
RP/0/RP0/CPU0:router#admin
Mon May 22 06:57:29.350 UTC
root connected from 127.0.0.1 using console on host
sysadmin-vm:0_RP0# exit
Mon May 22 06:57:32.360 UTC
The following example shows the command output with the login banner disabled:
RP/0/RP0/CPU0:router#admin
Thu Mar 01:07:14.509 UTC
sysadmin-vm:0_RP0# exit
After you enter the System Admin VM console, the router prompt changes to
sysadmin-vm:0_RP0#
Bring-up the Cisco NCS 6008 Router
4
is displayed on accessing the System Admin VM console. For details on how to get the System Admin
prompt, see Access the System Admin VM Console, on page
Bring-up the Cisco NCS 6008 Router
4.