Figure 2-5 Cisco 67X Connected Through An Internal Pots Splitter - Cisco 678 Installation And Operation Manual

Chapter 2 Installation Procedures
Figure 2-5 Cisco 67x Connected through an Internal POTS Splitter
Telephone
NID
Note
EZ-DSL™ (Splitterless) Configuration
Note
78-11190-01
Voice
POTS
Splitter
Data
Cisco 67x
The POTS splitter can also be installed adjacent to the telephone
network interface device (NID) on the outside of the house.
This configuration applies to the Cisco 627, Cisco 675, Cisco 675e,
Cisco 676, Cisco 677, and Cisco 678 only.
In the EZ-DSL configuration, your telephone equipment is not connected to a
POTS splitter. Without a POTS splitter and under certain circumstances, transient
noise from a telephone can interfere with the router's operation, and the router can
cause noise on the telephone line. To prevent this from happening, small
Ethernet
Hub
Cisco 600 Series Installation and Operation Guide
Set Up the Hardware Environment
2-9