Set Passwords - Cisco 678 Installation And Operation Manual

Chapter 5 Configuration Procedures for the Cisco 67x CPE Devices
Step 4
Step 5

Set Passwords

Step 1
Step 2
Step 3
Step 4
78-11190-01
To save your changes, enter:
write
To exit the CBOS, enter:
quit
After you have configured your Cisco 67x, select and configure new passwords
for both the enable and exec modes. Examples of good and bad passwords are:
Good Password: 77ta99y (Do not use the sample password.)
•
Bad Passwords: Names, personal identification numbers, birthdates,
•
addresses, home telephone numbers.
Use the set password command to change both the enable and exec user
passwords:
To change the enable user password, enter:
set password enable new password
To change the exec user password, enter:
set password exec new password
To save your changes, enter:
write
To exit the CBOS, enter:
quit
Cisco 600 Series Installation and Operation Guide
Set Passwords
5-47