Install And Connect The Router; Unpack The Router; Set Up Router On Desktop, Rack, Or Wall - Cisco C11 1 8P Series Hardware Installation Manual

Install and Connect the Router

This chapter describes how to install and connect Cisco 1000 Series Integrated Services Router (ISR) to LAN
and WAN networks.
Warning
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Installing the Cisco 1000 Series Integrated Services Routers involve these tasks:
•
•
•
•
•
•

Unpack the Router

Unpack the router only when you are ready to install it. If the installation site is not ready, to prevent accidental
damage, keep the chassis in its shipping container until you are ready to install.
The router, accessory kit, publications, and any optional equipment you order may be shipped in more than
one container. When you unpack the containers, check the packing list to ensure that you have received all
listed items.

Set up Router on Desktop, Rack, or Wall

After unpacking, based on your requirements, you can set up a Cisco 1100 Series Integrated Services Routers
(ISRs) on a desktop, a rack, or the wall.
Unpack the Router, on page 29
Set up Router on Desktop, Rack, or Wall, on page 29
Connect Power Cable, on page 47
Connect the Router to a Console, on page 49
Connect WAN and LAN Interfaces, on page 53
Configure the Router at Startup, on page 54
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
3
C H A P T E R
29