NEC mPD780065 Series Preliminary User's Manual page 207

(2) Bit rate and pulse width
Table 13-5 lists bit rates, bit rate error tolerances, and pulse width values.
Bit Rate Bit Rate Error Tolerance
(kbits/s) (% of bit rate)
Note 1
115.2 +/– 0.87
Notes 1. At the operation time with f
2. When a digital noise elimination circuit is used in a microcontroller operating at 1.41 MHz or above.
Caution When using the baud rate generator control register (BRGC0) in infrared data transfer mode,
set 10H to it.
Remark f : main system clock oscillation frequency
X
CHAPTER 13 SERIAL INTERFACE (UART0)
Table 13-5. Bit Rate and Pulse Width Values
Pulse Width Minimum Value
( µ s)
Note 2
1.41
= 7.3728 MHz
X
Preliminary User's Manual U13420EJ2V0UM00
3/16 Pulse Width
Maximum Pulse Width
<Nominal Value>
( µ s)
1.63
( µ s)
2.71
207