ABB ACS510-01 User Manual page 216

216
The table below lists copper and aluminum cable types for different load currents.
These recommendations apply only for the conditions listed at the top of the table.
Based on:
• EN 60204-1 and IEC 60364-5-2/2001
• PVC insulation
• 30 °C (86 °F) ambient temperature
• 70 °C (158 °F) surface temperature
• Cables with concentric copper shield
• Not more than nine cables laid on cable ladder
side by side.
Max
Load
Current
(A)
14
20
27
34
47
62
79
98
119
153
186
215
249
284
Ground Connections
For personnel safety, proper operation and reduction of electromagnetic emission/
pick-up, the drive and the motor must be grounded at the installation site.
• Conductors must be adequately sized as required by safety regulations.
• Power cable shields must be connected to the drive PE terminal in order to meet
safety regulations.
• Power cable shields are suitable for use as equipment grounding conductors only
when the shield conductors are adequately sized as required by safety
regulations.
• In multiple drive installations, do not connect drive terminals in series.
Technical Data
Supplied from China by: Guangzhou Tofee Electro Mechanical Equipment Co., Ltd
Email: info@tofee.com.cn
IEC
Max
Cu Cable Load
2
(mm ) Current
(A)
3x1.5 Do not use aluminum
cable with frame sizes
3x2.5
R1...R4
3x4
3x6
3x10
3x16
3x25
3x35 91
3x50 117
3x70 143
3x95 165
3x120 191
3x150 218
3x185 257
274
285
Based on:
• NEC Table 310-16 for copper wires
• 90 °C (194 °F) wire insulation
• 40 °C (104 °F) ambient temperature
• Not more than three current-carrying
conductors in raceway or cable, or earth
(directly buried).
• Copper cables with concentric copper shield
Max Load
Al Cable
Current
2
(mm )
(A)
22.8
27.3
36.4
50.1
68.3
86.5
100
3x50 118
3x70 137
3x95 155
3x120 178
3x150 205
3x185 237
3x240 264
3x (3x50) 291
2x (3x95) 319
ACS510 User's Manual
NEC
Cu Wire Size
(AWG/kcmil)
14
12
10
8
6
4
3
2
1
1/0
2/0
3/0
4/0
250 MCM or 2 x 1
300 MCM or 2 x 1/0
350 MCM or 2 x 2/0