ABB ACS510-01 User Manual page 148

148
Input Reference Select
Using the fieldbus to provide input references to the drive requires:
• Drive parameter values set as defined below.
• Fieldbus controller supplied reference word(s) in the appropriate location. (The
location is defined by the Protocol Reference, which is protocol dependent.)
Drive Parameter
1102
1103
1106
Reference Scaling
Where required,
• Modbus Register "40002" in the "Modbus Protocol Technical Data" section.
• "Reference Scaling" in the "ABB Control Profiles Technical Data" section.
Miscellaneous Drive Control
Using the fieldbus for miscellaneous drive control requires:
• Drive parameter values set as defined below.
• Fieldbus controller supplied command(s) in the appropriate location. (The
location is defined by the Protocol Reference, which is protocol dependent.)
Drive Parameter
1601
1604
1606
1607
1608
1609
2201
Embedded Fieldbus
Supplied from China by: Guangzhou Tofee Electro Mechanical Equipment Co., Ltd
Email: info@tofee.com.cn
Value
1/ 2 8 ( ) Reference set selection by fieldbus.
EXT EXT SEL COMM
1 8 ( ) Input reference 1 by fieldbus.
REF SELECT COMM
2 8 ( ) Input reference 2 by fieldbus.
REF SELECT COMM
REFERENCES
Value
7 (
RUN ENABLE COMM
8 (
FAULT RESET SEL COMM
8 (
LOCAL LOCK COMM
1 (
PARAM SAVE SAVE
1 7 (
START ENABLE COMM
2 7 (
START ENABLE COMM
/ 1/2 7 (
ACC DEC SEL COMM
Description
can be scaled. See the following, as appropriate:
Description
) Run enable by fieldbus.
) Fault reset by fieldbus.
) Source for local lock selection is
the fieldbus.
) Saves altered parameters to
memory (then value returns to 0).
) Source for start enable 1 is the
fieldbus Command word.
) Source for start enable 2 is the
fieldbus Command word.
) Source for ramp pair selection is
the fieldbus.
ACS510 User's Manual
Modbus Protocol
Reference
ABB DRV DCU PROFILE
40001 bit 11 40031 bit 5
40002
40003
Modbus Protocol
Reference
ABB DRV DCU PROFILE
40001 bit 3 40031 bit 6
(inverted)
40001 bit 7 40031 bit 4
Does not 40031 bit 14
apply
41607
Does not 40032 bit 2
apply.
40032 bit 3
40031 bit 10