Table of Contents
Advertisement
Installing the BJ Cartridge in the MultiPASS
When there is no BJ cartridge installed in the MultiPASS, the LCD displays PUT IN
CARTRIDGE.
Follow this procedure to install the BJ cartridge:
1
Make sure the MultiPASS is plugged in.
2
Open the document tray.
3
Lift the handle to open the printer
cover.
• The cartridge holder automatically moves
to the centre of the unit.
c
• Do not try to manually move or stop
the cartridge holder since this may
damage the unit.
• Do not touch the components
shown or any metal parts since this
may adversely affect operation of
the unit and/or affect print quality.
2-14
Setting Up
GUIDE RAIL
ROUND
SHAFT
CIRCUIT BOARD
RIBBON CABLE
HANDLE
Chapter 2
Advertisement
Table of Contents
