Table of Contents
Advertisement
Message
INSTALL BC33/30
INSTALL BC33/34
K INK EMPTY
LOAD PAPER
M INK EMPTY
MEMORY FULL
Chapter 13
Error Code Cause
—
You disabled the PHOTO
INK PRINT setting
(1 p. 14-8) and tried to
make a black & white
copy, print a received
black & white fax, print a
report, or print a black &
white document in
memory with the installed
Photo BJ cartridge.
—
You tried to make a
colour copy with the
installed Black BJ
cartridge.
—
The Black BJ tank in the
Colour, Photo, or Black
BJ cartridge is empty.
—
The multi-purpose tray is
empty.
—
The Magenta BJ tank in
the Colour or Photo BJ
cartridge is empty.
#037
The unit's memory is full
because it has received
too many documents, or
a very long or detailed
document.
Action
Replace the BJ cartridge
with the Colour or Black BJ
cartridge (1 p. 12-12).
Alternatively, enable the
PHOTO INK PRINT setting.
(1 p. 14-8)
Replace the BJ cartridge
with the Colour or Photo
BJ cartridge. (1 p. 12-12)
Replace the BJ tank
(1 p. 12-18). The unit will
then print automatically any
faxes received in memory.
Load paper in the multi-
purpose tray (1 p. 2-17).
Make sure the stack is
below the paper limit mark
(P). Then press Resume.
Replace the BJ tank
(1 p. 12-18). The unit will
then print automatically any
faxes received in memory.
Print any documents stored
in memory (1 pp. 7-17,
8-11, 8-13). Then start
again.
Troubleshooting
13-9
Advertisement
Table of Contents
