Table of Contents
Advertisement
Problems With Multipage Documents
If you have trouble feeding multipage documents into the ADF, remove the stack and
tap it on a flat surface to even the edges. Then "slant" the stack so that its front edge is
bevelled, and insert the stack into the ADF.
n
To avoid feeding problems, make sure the document meets the document requirements.
(1 p. 4-2)
Adding Pages to the Document
If you are using automatic document feed and you need to add pages to your
document in the ADF, wait until the last page starts feeding, then load up to 20
additional pages (10 legal size). The last and first page should overlap by about
2.5 cm.
4-6
Document Handling
2.5 cm
Chapter 4
Advertisement
Table of Contents
