Canon MultiPASS C100 User Manual page 109

4
If you hear a person's voice:
Start your conversation. If the caller wants
to send a fax after talking to you, ask them
to press the start button on their fax
machine.
When you hear a slow beep, press Start
on the MultiPASS to begin receiving the
fax. Hang up the handset.
• If the telephone is located away from your
unit, dial 25 (the remote receiving ID) on your
telephone and hang up.
• The MultiPASS begins receiving the fax.
If you hear a slow beep tone or silence:
Someone is trying to send you a fax.
If the telephone is close to your unit, press
Start on the MultiPASS to begin receiving
the fax. Hang up the handset.
• If the telephone is located away from your
unit, dial 25 (the remote receiving ID) on your
telephone and hang up.
• The MultiPASS begins receiving the fax.
n
• Be sure to hang up the handset after you press Start or dial the remote receiving ID;
otherwise the call will be disconnected.
• You can change the number for the remote receiving ID (00 to 99), or disable remote
receiving. (1 REMOTE RX, p. 14-7)
• The unit will beep if the handset is not hung up properly. Make sure the handset is
seated properly in its cradle. If you do not want the unit to beep, disable the OFFHOOK
ALARM setting. (1 p. 14-4)
• If you have an answering machine connected to your MultiPASS that can carry out
remote-control operations (controlling your answering machine from a remote telephone),
the security code for this function may be the same as the remote receiving ID. If so,
make sure you change the MultiPASS' remote receiving ID to make it distinct from the
answering machine's security code. (1 REMOTE RX ID, p. 14-7)
Chapter 8 Receiving Faxes
8-9