Canon MultiPASS C100 User Manual page 3

Canon multipass c100: user guide
Table of Contents

Advertisement

For Your Safety (Australia Only)
To ensure safe operation the three-pin plug supplied must be inserted only into a
standard three-pin power point which is effectively earthed through the normal
household wiring.
Extension cords used with the equipment must be three-core and be correctly wired to
provide connection to earth. Wrongly wired extension cords are a major cause of
fatalities.
The power point shall be located near the equipment and shall be easily accessible.
The fact that the equipment operates satisfactorily does not imply that the power point
is earthed and the installation is completely safe. For your safety, if in any doubt about
the effective earthing of the power point, consult a qualified electrician.
Caution (New Zealand Only)
1. This equipment may not necessarily provide for the effective hand-over of a call to or
from a telephone connected to the same line.
2. The operation of this equipment on the same line as telephone or other equipment
with audible warning devices or automatic ring detectors will give rise to bell tinkle or
noise and may cause false tripping of the ring detector. Should such problems occur,
the user is not to contact Telecom faults service.
3. Should this equipment become physically damaged, disconnect immediately from
the Telecom connection and power source and contact your nearest service agent.
4. To relocate this equipment please.
1) Disconnect the equipment from the Telecom connection.
2) Disconnect the equipment from the power source.
3) Reconnect the equipment to the power source.
4) Reconnect the equipment to the Telecom connection.
5. If the supply cord of this equipment is damaged, it must be replaced by the special
cord (Parts No.: HH2-1910).
6. Not all standard telephones will respond to incoming ringing when connected to the
extension socket.
7. This device may be subject to bell tinkle, or mistakenly enter receive mode when
calls are made from another device on the same line. If this occurs, the problem
should not be referred to the Telecom Faults service.
8. Please note when you connect an extension phone to this device, if you use an
extension phone which has features such as "last number redial", redial memory
numbers may be lost.
Preface
iii

Advertisement

Table of Contents
loading

Table of Contents