Table of Contents
Advertisement
Connecting the MultiPASS to Your PC
To connect the MultiPASS to your PC, you will need to purchase a printer cable that
matches the interface connector on your PC:
• A Centronics
-or-
• A USB cable no longer than 5 metres
You can purchase either of these cables from your local authorised Canon dealer.
Follow this procedure to connect the appropriate cable:
Connecting a USB Cable
Connect the USB cable to
the MultiPASS and PC
during software installation
to ensure proper operation
of the printer driver.
(1 MultiPASS Suite User's
Guide )
n
• You only need to connect one of the above cables.
• If using a USB cable, make sure your PC is running Microsoft Windows
Windows
operation also needs to be assured by the manufacturer.)
2-8
Setting Up
®
-compatible parallel cable (IEEE 1284-compliant) no longer than 2 metres
®
2000, preinstalled by a computer manufacturer on purchase. (The USB port
Connecting a Parallel Cable
Connect the parallel cable to
the MultiPASS and PC. Be
sure to secure the cable
connectors with the wire
clips.
®
98/Me or
Chapter 2
Advertisement
Table of Contents
