Summary Of Lists And Reports - Canon MultiPASS C100 User Manual

Summary of Lists and Reports

The table below shows the lists and reports that can be printed from your MultiPASS.
Refer to the pages indicated for more details.
Report or List
USER'S DATA LIST
ACTIVITY REPORT
TX (Transmission) REPORT
RX (Reception) REPORT
MULTI TX/RX (Transaction)
REPORT
DOC. MEMORY LIST
MEMORY CLEAR REPORT
1-TOUCH SPD DIAL LIST
CODED SPEED DIAL LIST
GROUP DIAL LIST
11-2
Reports and Lists
Description
Lists the current settings of your MultiPASS
and the registered sender information.
Shows recent facsimile transactions performed
by your MultiPASS.
You can enable or disable automatic printing
of this report after every 20 transactions. You
can also manually set the MultiPASS to print it.
Prints after transmission of a document.
You can enable or disable this feature, or set
the MultiPASS to print a report only when an
error occurs.
You can also set the MultiPASS to print the
first page of the document under the
transmission report to remind you of the
contents of the document.
Prints after reception of a document. You
can enable or disable this feature, or set
the MultiPASS to print a report only when
an error occurs.
Prints after sequential broadcasting of a
document.
Lists the documents currently stored in the
MultiPASS' memory.
Prints automatically when power is restored
to the MultiPASS after a power cut. Lists the
documents deleted from memory.
Lists the numbers and names registered
under one-touch speed dialling buttons.
Lists the numbers and names registered
under coded speed dialling codes.
Lists groups registered under one-touch
speed dialling buttons and coded speed
dialling codes.
Details
p. 3-9
p. 11-3
p. 14-5
p. 11-4
p. 14-5
p. 11-5
p. 14-5
p. 11-5
p. 7-16
p. 13-26
p. 6-13
p. 6-13
p. 6-13
Chapter 11