Table of Contents
Advertisement
Connecting the Power Cord
Before connecting the power cord, 1 Power Supply, p. 1-6.
Follow this procedure to connect the power cord:
Connect the supplied
power cord to the power
cord connector. Then
connect the other end into
a properly grounded
200–240 V AC three-prong
outlet.*
The MultiPASS has no power switch, so its power is on as long as it is plugged in.
Once connected, though, the unit still needs to warm up before you can use it. Wait
until the LCD no longer displays PLEASE WAIT.
n
• The MultiPASS is equipped with a three-prong, grounding-type plug provided with a third
(grounding) pin. This plug will only fit into a grounding-type outlet. This is a safety
feature. If you are unable to insert the plug into your outlet, contact an electrician to
replace your outlet. Do not defeat the safety purpose of the grounding-type plug by
breaking off the third prong or using a 3-to-2 adaptor.*
• Do not plug the MultiPASS into the same circuit as an appliance such as an air
conditioner, electric typewriter, television, or copier. Such devices generate electrical
noise that can interfere with your MultiPASS' ability to send and receive faxes.
* The shape of the plug and outlet vary depending on the country of purchase.
Chapter 2
2-9
Setting Up
Advertisement
Table of Contents
