Table of Contents
Advertisement
Follow this procedure to set the Fax/Tel Mode options:
1
Follow steps 1 to 9 on page 8-5.
2
Press Set.
3
Use the numeric buttons to enter the
time the unit waits before ringing when it
receives a call.
• You can select from 0 to 30 seconds.
• The default setting is eight seconds.
4
Press Set twice.
5
Use the numeric buttons to enter the time
the unit rings while waiting for someone to
pick up the handset.
• You can select from 10 to 60 seconds.
• The default setting is 22 seconds.
6
Press Set twice.
7
Use d or u to select RECEIVE or
DISCONNECT.
• This setting tells the unit what to do if no one
picks up the handset within the specified ring
time set in step 5.
• Select RECEIVE to receive the call, or
DISCONNECT to disconnect the call.
• The default setting is RECEIVE.
8
Press Set.
9
Press Stop to return to standby mode.
Chapter 8
RING START TIME
Ex:
8SEC
Ex:
9SEC
F/T RING TIME
Ex:
22SEC
Ex:
30SEC
DEFAULT ACTION
Ex:
RECEIVE
Ex:
DISCONNECT
INCOMING RING
Ex:
15:00
FaxTel
Receiving Faxes
8-7
Advertisement
Table of Contents
