Table of Contents
Advertisement
Problem Documents
• To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Torn paper
• Remove all fasteners (staples, paper clips, etc.) before loading the document into the
ADF.
• Make sure any glue, ink, or correction fluid on the document is completely dry before
loading it into the ADF.
• If you have a document that will not feed properly into the ADF, make a photocopy of
the document and load the copy instead.
Scanned Area of a Document
The shaded area in the illustration below shows the scanned area of a document.
Make sure your document's text and graphics are within this area.
MAX. 4.5 mm
Chapter 4
– Carbon paper or carbon-backed paper
– Coated paper
– Onion skin or thin paper
MAX. 4.0 mm
A4
MAX. 4.0 mm
COLOUR FAX: MAX. 6.0 mm
MAX. 4.5 mm
Document Handling
4-3
Advertisement
Table of Contents
