Removing Shipping Materials
Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the unit in the future:
1
Remove all
shipping tapes
from the
MultiPASS.
3
Open the document tray, then
remove the shipping tape and
protective sheets.
5
Open the printer cover, then remove the
protective piece from the cartridge
holder.
Close the printer cover and document
tray.
n
The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.
2-4
Setting Up
2
Remove the
protective piece
from the multi-
purpose tray.
4
Open the operation panel
partially by gently pulling it
towards you (it only opens
slightly). Then remove the
protective sheet from the ADF.
Close the operation panel by
pressing it down from the
centre until it locks into place.
Chapter 2