Canon MultiPASS C100 User Manual page 150

7
Press on the two orange tabs and
remove the two orange pieces from the
BJ cartridge.
8
Install the BJ tanks into the BJ
cartridge. Be sure to install them in their
correct slot. The illustration here shows
the correct colour array of BJ tanks in a
BJ cartridge.
• For details on the BJ tanks for each BJ
cartridge, 1 p. 12-7.
Start with the far right BJ tank.
If you are installing a new BJ tank,
remove the packing film by pulling on the
orange tape q. Then grip the bottom of
the BJ tank and twist off the orange
protective cap in the direction shown w.
• If you are simply replacing the BJ cartridge
and not the BJ tanks, reinsert the partially
used BJ tanks into the new BJ cartridge. Be
sure to insert them in their correct slot and
from right to left.
• For a new BJ tank, carefully remove the
packing film taking care not to remove the
label from the BJ tank.
• Discard the packing film and cap. Never
attempt to reattach them to the BJ tank.
• Do not touch the ink port on the BJ tank.
• Spilled ink can stain any surface; protect
yourself and your work area.
12-14
Maintenance
ORANGE TABS
Colour or Photo BJ cartridge
Ink Tank Ink Tank Ink Tank Ink Tank
BCI-3eBK BCI-3eC BCI-3eM BCI-3eY
Black Cyan Magenta Yellow
Made in Japan Made in Japan Made in Japan Made in Japan
PUSH PUSH PUSH PUSH
BLACK YELLOW
CYAN MAGENTA
2
1
TO PREVENT INK SPILLS, DO NOT
PRESS THE SIDES OF THE BJ TANK.
Chapter 12