Table of Contents
Advertisement
Receiving While Performing Other Tasks
Since the MultiPASS is a multitasking device, it can receive faxes and voice calls while
you are performing other tasks.
If you receive a fax while you are performing certain tasks, the MultiPASS stores the
incoming fax in memory. Then, as soon as you finish your task, the MultiPASS
automatically prints the fax.
Receiving Faxes in Memory When a
Problem Occurs
If the MultiPASS encounters a problem when it is receiving a fax, the unit automatically
stores the unprinted pages of the fax in memory, and the LCD displays REC'D IN
MEMORY as well as one or more messages. For an explanation of the message(s)
and details on the action to take, 1 p. 13-5.
n
• The MultiPASS memory can store up to approximately 416 pages.*
• You can set the MultiPASS not to store faxes in memory if a problem occurs during
reception. (1 MEMORY RX, p. 14-7)
• Once the pages are printed, they are deleted from memory.
• If the memory becomes full, you will not be able to receive the remaining pages. Contact
the other party and ask them to resend the remainder of the fax.
Cancelling Receiving
Follow this procedure if you want to stop receiving a fax before reception is completed:
1
Press Stop.
• The MultiPASS asks you to confirm that you
want to cancel.
Press T to cancel receiving.
2
• Receiving is not cancelled until you press T.
• If you change your mind and want to continue
receiving, press #.
* Based on Canon FAX Standard Chart No. 1, standard mode.
Chapter 8
CANCEL? AYES #NO
YES=(A) NO=(#)
TX/RX CANCELLED
Ex:
TX/RX NO.
5003
Receiving Faxes
8-13
Advertisement
Table of Contents
