Receiving Both Faxes And Telephone Calls Automatically: Fax/Tel Mode; Setting Fax/Tel Mode - Canon MultiPASS C100 User Manual

Receiving Both Faxes and Telephone Calls
Automatically: Fax/Tel Mode
Set this mode if you want your MultiPASS to automatically switch between voice and
fax calls.
n
For this mode, you need to connect the optional handset or a telephone to your unit.
(1 p. 2-6)

Setting Fax/Tel Mode

Follow this procedure to set the receive mode to FAX/TEL AUTO SW
(Fax/Tel Mode):
1
Press Function.
2
Press Data Registration.
3
Press Set.
4 Use d or u to select RX SETTINGS.
5
Press Set.
6 Use d or u to select RX MODE.
7
Press Set.
8 Use d or u to select FAX/TEL AUTO SW.
9
Press Set.
10
Press Stop to return to standby mode.
11
Confirm that FaxTel is displayed in the LCD.
• If FaxTel is not displayed, press Receive
Mode to select Fax/Tel Mode. After a few
seconds, the LCD returns to standby mode.
Chapter 8
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX ONLY MODE
FAX/TEL AUTO SW
RING START TIME
Ex:
15:00 FaxTel
Ex:
15:00 FaxTel
Receiving Faxes
8-5