Table of Contents
Advertisement
Regular dialling:
Use the numeric buttons to enter the fax
number, then press Set.
• You can only enter one fax number this way.
n
• If you enter an incorrect destination,
press Function, then Clear. Then
press Function again, and enter the
correct destination.
• You must enter the second fax number
within five seconds of entering the first
one. All subsequent fax numbers must
be entered within 10 seconds. If you
wait longer than these times, the
MultiPASS automatically begins
scanning the document for sending. If
you prefer the MultiPASS not to do this,
disable the TIME OUT setting.
(1 p. 14-6)
• If you want to review the numbers you
entered, press Function and use d or
u to scroll through the numbers.
5
Press Start to begin scanning for sending,
or wait a few seconds for the MultiPASS to
begin scanning automatically.
• The MultiPASS will first send the document to
the one-touch speed dialling destinations, then
the coded speed dialling destinations, and
finally to the destination dialled using regular
dialling.
• If you prefer the MultiPASS never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (1 p. 14-6)
• To cancel sending, press Stop then T.
Sending to all destinations you specified in
step 4 will be cancelled (you cannot cancel
only one destination), and the MultiPASS will
print a MULTI TX/RX REPORT. (1 p. 11-5)
n
• If a number is busy, the unit will continue sending to the other destinations and then
redial the number that was busy.
• If the MultiPASS' memory becomes full while scanning your document, MEMORY FULL
will appear in the LCD. If this happens, remove the remainder of the document from the
ADF (you may need to open the operation panel to do so), then divide the document into
several sections and send each section separately.
• If you attempt to send a colour document to a fax machine that does not support colour
faxing, the document will not be sent, the LCD will display TRY AGAIN IN B&W, and
transmission to that destination will be cancelled. Try sending again in black & white.
(This occurs even if the COLOUR DIRECT TX setting is enabled.)
7-14
Sending Faxes
Ex:
TEL=2 887 0166
Chapter 7
Advertisement
Table of Contents
