Change Set Up - CME BodyGuard 545 Color Vision Directions For Use Manual

Change Set Up

For users to configure the variable default settings they must use the Technicians
Access Code. To change default settings follow these steps:
From the main menu select 'Change Set Up' and press
1.
Enter the relevant access code & press
2.
NOTE: Not all pump parameters mentioned in the below table can be

configured by the user. Only those highlighted in the table are changeable at a
local level.
Scroll through the parameters to the one you wish to change and press
3.
a numeric value simply key in the new value and press
value, scroll through the options and press
4. Once the user has changed or confirmed a parameter the pump returns to the
'Exit' choice. Press
(repeating step 3 above).
BodyGuard 545 Color Vision™ Directions For Use
_to exit or scroll down to view/change another parameter
5 - Alarm Conditions and Troubleshooting
.
again.
. If it is an optional
to confirm your choice.
. If it is
62