CME BodyGuard 545 Color Vision Directions For Use Manual page 42

2. If the previous infusion was not over, the
following screen will appear:
3.
To continue previous infusion, press
The screen will then prompt for code.
level one access code and press
the selected protocol details and press
the pump prompts to 'Start infusion?' or 'Start
Auto-Bolus?'.
infusion.
To start a new infusion press
4.
relevant code and press
5. To prime the set select 'Prime' and confirm with
. Prime as explained in the priming section of
this manual.
Warning: Do not attach the set to the patient's access device before priming
the administration set.
6. From the menu 'Select Protocol' by scrolling with
the arrow keys and pressing
BodyGuard 545 Color Vision™ Directions For Use
Confirm with
.
.
EPIDURAL
A: Levobupivacaine
Press
Press
,
EPIDURAL
Enter
Review
.
Start Infusion ?
until
Press
and start
EPIDURAL
Start Auto-Bolus?
Press
. The screen than will prompt for code. Enter
EPIDURAL
Prime
Select Protocol
Change Bag
View Protocol Settings
View Shift Totals
View Patient History
View Event Log
Press
Select
EPIDURAL
Prime
Select Protocol
Change Bag
View Protocol Settings
View Shift Totals
View Patient History
View Event Log
Press
Select
4 - Operation
10:00 - 70%
key to Resume
key for Menu
10:00 - 70%
key to start
10:00 - 70%
key to start
10:00 - 70% █
- Exit Menu
, and press
10:00 - 70%
- Exit Menu
, and press
█
■
█
■
█
■
■
█
■
42