Download
Share
Print this page
  1. Manuals
  2. Brands
  3. CME Manuals
  4. Medical Equipment
  5. BodyGuard 323 Color Vision
  6. Quick reference manual

CME BodyGuard 323 Color Vision Quick Reference Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
BodyGuard 323 Color Vision
Quick Reference Guide (Clinical)
Infusion Status
indicator
On/Off
button
Keypad Lock
button
Info
button
Bolus Port
connector
AC/Battery
indicator
• This guide is not intended to be comprehensive instructions for
the setup and operation of the infusion pump. For complete
pump information, refer to the BodyGuard 323 Color Vision™
Directions For Use .
• Some screens in this guide may vary depending on the way the
pump is set up. They are for reference purposes only and may
be different than the information displayed on your system.
• Before operating the pump, users should consult the full
directions for use.
• If you need assistance with setting up or maintaining the
equipment or to report unexpected operation or events, contact
the manufacturer or manufacturer's representative.
Software Version BGCV_CFN_24A1
TM
Backup Display
rate / VI / VTBI
Stop/No/Back/
Cancel
button
Start/OK
button
Prime/Bolus
button
Door Latch
lever

Advertisement

loading
Need help?

Need help?

Do you have a question about the BodyGuard 323 Color Vision and is the answer not in the manual?

Questions and answers

Related Manuals for CME BodyGuard 323 Color Vision

Summary of Contents for CME BodyGuard 323 Color Vision

  • Page 1 • This guide is not intended to be comprehensive instructions for the setup and operation of the infusion pump. For complete pump information, refer to the BodyGuard 323 Color Vision™ Directions For Use . • Some screens in this guide may vary depending on the way the pump is set up.
  • Page 2 Loading Infusion Set • Ensure the pump is secured in the pump charger. STEP 1 Ensure the pump and charger are fastened to the pole (if using pole) using the roller wheel at the back of pump charger. BodyGuard Color Vision 323 • Switch on the pump by pressing .
  • Page 3 Loading Infusion Set STEP 4 • Insert the bag spike into the fluid container. • If a drip chamber is present, fill the drip chamber halfway. STEP 5 • Pull down the door latch to open the door. • Securely fit the black key into the pressure sensor fitment on the right side. • The two protrusions must face up. The key can only be loaded in this direction. • Ensure that the flow direction is in line with the flow direction arrows inside the pump.
  • Page 4 Infusion Set Priming Continuous, 25-Steps, TPN, Intermittent, Drug Library STEP 1 • To prime and eliminate the air from the set, press key. Continuous 10:00 ███■ • Disconnect the patient prior to starting the prime Prime function Warning ! Disconnect Patient Press key to Start The prime function must not be performed while the IV set is...
  • Page 5 Start New Infusion Continuous STEP 1 • Select mL/h or press the key to switch to mg/kg units. Pressing the key again will Continuous 10:00 ███■ switch to mcg/kg units. mL/hr • To switch from mg/mcg units to ml/h, enter a Press Key to Continue value of “0”...
  • Page 6 Start New Infusion Continuous STEP 4 • Review the infusion parameters and confirm. • To make changes, press the key to return Continuous 10:00 ███■ back. Rate 125 mL/hr Program Volume 1000 mL Volume Left 1000 mL Volume Infused 0 mL Air Sensor 0.3 mL Pressure 730 mmHg Press...
  • Page 7 Rate Titration, Keypad Lock, History Rate Titration To change rate during infusion: • Enter a new rate and confirm with key. Continuous 10:00 ███■ Rate • Single alarm sounds as confirmation. Make sure the new rate is displayed on screen. mL/hr ███████████ █ ████████████████ mmHg Titration may not be available in all modes or setups. Keypad Lock Keypad lock: prevents unauthorized changes: • Press and hold the...
  • Page 8 Secondary (Piggyback) / Bolus Infusion Continuous To deliver a secondary (Piggyback) infusion or a STEP 1 bolus: Continuous 10:00 ███■ Continuous 10:00 ███■ • Press the key. Secondary Infusion Piggy Rate Bolus Dose • Enter the desired rate/ dose. mL/hr Adjust and press Adjust and press Go to pump settings to select either Piggyback or bolus system.
  • Page 9 Start New Infusion 25 Steps 25-Steps 10:00 ███■ Rate (Step 1) 25 – Steps VAL ml/h Program Press & Hold to change Volume (Step 1) VAL minutes Rate (Step 2) VAL ml/h Volume (Step 2) VAL minutes When Done Enter “0”, Press Review Summary...
  • Page 10 Start New Infusion 10:00 ███■ Bag Volume VALUE mL Program Press & Hold to change Volume TBI VALUE mL Total Time HH:mm Up Time HH:mm Down Time HH:mm KVO Rate 0-20 mL/hr Review Summary Start Infusion? For Early Taper Down, press and hold key.
  • Page 11 Start New Infusion Intermittent Intermittent 10:00 ███■ Bag Volume Intermittent VALUE mL Program Press & Hold to change Dose Volume VALUE mL Number of Doses Minimum Dose Rate VALUE mL/hr Dose Duration HH:mm Interval Time HH:mm KVO Rate 0-20 mL/hr Review Summary Start...
  • Page 12 Start New Infusion 10:00 ███■ Program Key to Continue Press 10:00 ███■ 10:00 ███■ Prime Prime Program Infusion Program Infusion Clinician Bolus Clinician Bolus Patient History Patient History Review Set up Review Set up Change Set up Change Set up Select and press Select...
  • Page 13 Start New Infusion Set VALUE Basal Rate to Zero for VALUE ml/hr, mg/hr, mcg/hr Bolus Only Maximum Titration Rate VALUE ml/hr, mg/hr, mcg/hr Bolus Dose VALUE ml, mg, mcg Maximum Bolus Dose VALUE ml, mg, mcg Lock out Time VALUE minutes Program Time 0-24 Volume Limits VALUE...
  • Page 14 Start New Infusion Drug Library Drug Library 10:00 ███■ Select Drug Drug Library Program Library Demo DEP1 Department Patient Weight VALUE kg Dose VALUE mg/hr, mg/min, mcg/hr, mcg/min, mcg/kg/min, mg/kh/hr mcg/kg/hr, mg/kg/min Volume VALUE Review Summary Start Infusion? 14/24 | QRG 999-603EN Rev. 00...

  • Page 15: Bolus Delivery

    Clinician Bolus Press Key During Infusion Press Bolus Key Code XXX Clinician Bolus Dose VALUE Bolus Infusion Bolus Delivery Drug Library Press Key During Infusion Bolus Volume Bolus Weight per Body Weight VALUE mL VALUE mg, mcg, mg/kg, mcg/kg (Optional) Bolus Duration Can be Set VALUE...

  • Page 16: Alerts & Alarms

    Alerts & Alarms Resume/Repeat • Pump was switched off before the last infusion has ended. ◊ Select Resume to continue from the last Continuous 10:00 ███■ stopped position. Resume – Press Repeat – Press ◊ Select Repeat to start a new infusion. End of Infusion • The infusion has ended.
  • Page 17 Alarms Pump Paused • Pump “Stopped” or unattended for 2 minutes or more. Resume infusion or turn off the pump. Continuous 10:00 ███■ • If the pump is turned off, you will have the option Pump Paused to resume from the last position. Too Long Press Missing Key...
  • Page 18 Alarms High Flow • High Priority Alarm. Infusion stops. • High drops counted by drop sensor. • Check the IV bag and drop sensor position. • Drop sensor is experiencing high drops. • If alarm is not resolved, send the pump for service. • The pump is set up to work with a drop sensor.

  • Page 19: Cleaning And Maintenance

    Cleaning & Maintenance Before connecting the pump to a patient, and periodically during use, clean the unit as instructed below. • Always turn the pump off and remove the battery before cleaning. • Always unplug the charger from AC power before cleaning. • Do not clean the pump or charger with chemicals such as Xylene, Acetone, or similar solvents.

  • Page 20: Intended Use

    Intended Use The BodyGuard 323 Color Vision™ infusion pump system is designed for infusion of medications or fluids requiring continuous or intermittent delivery at precisely-controlled infusion rates through clinically acceptable routes of administration, including intravenous, subcutaneous, percutaneous, in- tra-arterial, epidural, intrathecal, in close proximity to nerves, and into an intraoperative site (soft tissue/body cavity/surgical wound site).
  • Page 21 21/24 QRG 999-603EN Rev. 00 |...
  • Page 22 22/24 | QRG 999-603EN Rev. 00...
  • Page 23 23/24 QRG 999-603EN Rev. 00 |...
  • Page 24 Place Contact Information Here BodyGuard 323 Color Vision™ is a registered trademark of Caesarea Medical Electronics Ltd. or one of its subsidiaries. MedNet GmbH Caesarea Medical Electronics Ltd. 16 Shacham Street, Industrial Park Brokstrasse 10 48163 Caesarea North, P.O.BOX 3009...