Review Set Up; Change Set Up - CME BodyGuard 575 Color Vision Operator's Manual

Fix the obstruction in the I.V. line and press

Review Set Up

Selecting 'Review Set Up' from the main menu and pressing
scroll through, select and view any of the default parameters or events history.
Simply scroll to a parameter you wish to view and press
In this mode you can only view the parameters but cannot change any of the
values which users can configure.

Change Set Up

For users to configure the variable default settings they must use the Technicians
Access Code. To change default settings follow these steps: -
From the main menu select 'Change Set Up' and press
1.
2. Enter the relevant access code & press
 NOTE: Not all default parameters mentioned in the above table can be
configured by the user. Only those highlighted yellow in the table are
changeable at a local level.
3. Scroll through the parameters to the one you wish to change and press
. If it is a numeric value simply key in the new value and press
_. If it is an optional value, scroll through the options and press
confirm your choice.
4. Once the user has changed or confirmed a parameter the pump returns to
the 'Restart Pump' choice. Press
view/change another parameter repeating step 3 above.
Software ver. CVPCA30E_1
to continue.
_
again.
_to exit or scroll down to
46
allows you to
.
.
_ _to