CME BodyGuard 545 Color Vision Directions For Use Manual page 73

NOTE: When the pump is not in use, click the pump into the Charger and plug

the system into an AC wall outlet (if possible) to charge battery.
NOTE: After the "End Battery" signal has been activated or following long

periods of storage, wait 2 minutes after the pump has been connected to an
AC power supply before operating.
Caution: Leaving the battery in an uncharged state for a long period of time
may damage the battery.
NOTE: When possible, use the pump connected to an AC power supply via the

charging unit. This preserves the battery power supply for emergency use or
for situations where the AC power is not available.
NOTE: Replace the battery once every two years.

BodyGuard 545 Color Vision™ Directions For Use
7 – Service and Maintenance
73