Aerotech Automation1 SI4 Series Hardware Manual page 12

Installation Overview
1 Connect the motor feedback and amplifier to the Axis Connectors.
2 Connect the PC HyperWire to the HyperWire In port.
3 Connect additional I/O as required by your application.
4 Connect the power supply to the Control Supply.
Figure 2:
12
Installation Connection Overview (4 Axis OEM Shown)
SI4 Hardware Manual
Section 2.2.
Section 2.4.
Section 2.3.
Section 2.1.1.
www.aerotech.com