Mechanical Specifications; Mounting And Cooling; Table 1-3: Mounting Specifications - Aerotech Automation1 XL4s Hardware Manual

Chapter 1: Introduction

1.2. Mechanical Specifications

1.2.1. Mounting and Cooling

Install the XL4s in an IP54 compliant enclosure to comply with safety standards. Make sure that there is
sufficient clearance surrounding the drive for free airflow and for the cables and connections.
Table 1-3: Mounting Specifications
Enclosure
Weight
Mounting Hardware
Mounting Orientation
Dimensions
Minimum Clearance
Operating Temperature
18
M4 [#8] screws (four locations, not included)
Airflow
Connectors
Refer to
XL4s Hardware Manual
XL4s
IP54 Compliant
~2.9 kg
Vertical (typical)
Refer to Section 1.2.2. Dimensions
~25 mm
~100 mm
Section 1.3. Environmental Specifications
www.aerotech.com