1.2.4. OEM Mounting
1.2.4. OEM Mounting
OEM Mounting Procedure:
1. Secure the seven M3 standoffs to the mounting surface with M3 hex nuts. These hex nuts are not
included with the drive.
NOTE: Do not install the standoffs to the mounting surface with the drive already attached.
2. Attach the drive to the standoffs with the M3 screws. These screws are included with the drive.
Table 1-5:
OEM Mounting Parts
M3 Threaded Hex Standoff, 10mm length
M3 Philips Pan Head Screw, 8mm length
24
SI4 Hardware Manual
Aerotech P/N
EIH01181
HCY0003008
www.aerotech.com