Programming Key Lm - LAVAZZA Magystra LB 2600 INT Installation And Maintenance Manual

EN
If the rotation time is other than zero, the mixer fan
will be rotated at the expiry of this delay time.
START DELAY
MIXER N
The mixer rotation speed can be regulated between
low, medium, high by pressing keys "3" and "7"".
MIXER SPEED

PROGRAMMING KEY LM

"LM" refers to the programming of the second milk
to produce a "three-band" drink.
To establish the delay between the second milk and
the coffee dispensing cycle in the "Latte macchiato"
selection.
START DELAY
COFFEE
To establish the milk quantity of the second dis-
pensing cycle.
LATTE MACC. PROD
0=DISAB.
T o determine the delay of the second milk dispensing
cycle.
START DELAY
PRODUCT LM
To determine the breaks of the second milk dis-
pensing cycle.
BREAKS NUMBER
To establish the water quantity of the second milk
dispensing cycle.
WATER LATTE MACC.
0=DISAB.
20
PROGRAMMING
0.0
N
0.0
0.0
0.0
-
0.0
-
0.0
0.0
To determine the water quantity delay of the sec-
ond milk dispensing cycle.
START DELAY
WATER LM
To establish the mixer rotation time of the second
milk dispensing cycle.
MIXER LATTE MACC.
0=DISAB.
If other than zero, the mixer power on will be de-
layed by the time you have set up.
START DELAY
MIXER LM
To determine mixer rotation speed of the second
milk dispensing cycle.
MIXER SPEED LM N
Press "3" and "7" to choose the drink name to dis-
play during the dispensing cycle; options are listed
here below:
SELECTION NAME
"standard", the display will show "drink N under
preparation";
"list of names" of drinks made available in the ma-
chine memory; the display will show "drink name
under preparation".
During the dispensing cycle, the display shows the
progress of the drink that is being prepared:
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
DISPENSING
0.0
0.0
0.0