Table of Contents
Advertisement
EN
CAPSULE GROUP
Open the capsule unit lid.
Rotate the retainer in the direction indicated by the
arrow.
Retainer
Capsule support
Release the capsule support and extract it.
Wash the component you have extracted with plen-
ty of lukewarm water.
Reached 10,000 drinks it's recommended to re-
place the capsule sealing gasket and the perforator
sealing gasket.
36
MAINTENANCE AND CLEANING
ACCESS TO THE REAR
Unscrew the three screws intended to fasten the metal
panel.
Lift slightly and extract the panel.
All internal components of the machine can be now
accessed.
COOLING FAN AND POWDER ASPIRA-
TORS
Carefully check that the rotors of the two fans on the
rear panel of the vending machine can freely rotate
without any hindrance or stoppage.
Powder
aspirator
Make sure that the corrugated tube for connection
between the powder aspirator and the extraction
drawer is clean and free of any product deposit.
SILICONE TUBES
Make sure that the water transport tubes are intact
and that they have kept their transparency, replace
them, if necessary.
Air aspirator
- Quick Links:
- Programming Mode
- Out of Order
- Solution of Problems
Hide quick links:
Advertisement
Table of Contents
