Programming; Software; Programming Mode; Programming Menù - LAVAZZA Magystra LB 2600 INT Installation And Maintenance Manual

EN

SOFTWARE

Software installed in LB 2600 is divided into two
different parts referred to as:
• Master: it is the software determining the ma-
chine cycles, the links between the functions, the
order of execution of operations. This software
can not be modified by the operator, but it can
be updated with new releases.
• Configuration: it is the software determining
the times and the succession of dispensing
drinks, the payment system protocol, the display
modes, etc.... Variables may be modified by the
operator either manually aboard the machine or
by means of rheAction to adapt the machine be-
haviour to the final users' needs (product quan-
tities and mixtures, warning messages, etc...).

PROGRAMMING MODE

To access the programming mode, open the front
door of the machine and use the service key in the
safety switch.
The vending machine is supplied and running to
all effects in this mode of operation . Act extreme-
ly carefully .
Internal key

(PROGRAMMING)

18
PROGRAMMING
Press the "PROG" key, the display show the message:
"1" machine variable programming.
"2" to display the drink quantities you have dispensed.
"3" enable washing.
After having programmed, press "1" and then the
key "PROG" to go back to the usual operation of
the vending machine and to store all changes you
have made. The display will show:
PROGRAMMING MENÙ
Press the "1" key to scroll through the programming
menu.
USB
Key 1: to scroll the items forward
Key 5: to scroll the items backward
Key 2: to scroll the variables of items forward
Key 6: to scroll the variables of items backwards
Key 3: to increase the value of the variable on the screen
Key 7: to decrease the value of the variable on the screen
1= PROG 2= DATA
3= CLEANING
PROGRAMMING END
PLEASE WAIT..