Product Decounter; Programming Maintenance - LAVAZZA Magystra LB 2600 INT Installation And Maintenance Manual

Table of Contents

Advertisement

EN

➤ PRODUCT DECOUNTER

Each product motor can be assigned a time credit
in seconds that will be decreased at each dispens-
ing cycle of that product. After having used up the
credit, the machine will answer <<selection not avail-
able>> whenever a request is made for that product.
This control is disabled at the beginning and the
machine has got no constraint.
PRODUCT QTY.
[N= 0.0]
To programme the credit time of a product motor,
set the variable by pressing key "3" and "7".
After having reached the time quantity you wish,
press key "PROG"; the value will be copied be-
tween parentheses on the left of the display.
Quit the programming mode as usual.
That the first warning threshold can be pro-
grammed. If exceeded, the display will show an
alarm message without interfering with the opera-
tion of the machine.
PROD. 1 WARNING
THRESHOLD
After having used up the time credit, the operator
may decide whether to inhibit or not the dispensing
cycle of the selections, including that product.
PRODUCT STOP
ENABLE 1 = STOP 0
26
PROGRAMMING

➤ PROGRAMMING MAINTENANCE

In this ensemble of parameters, key "2", you can set
up some counters to trigger an alarm after a pro-
grammable number of events (press "3" and "7" to
set up and PROG to store).
It sets the threshold of capsules dispensed before
displaying the message "empty the capsule drawer".
CAPSULE DECOUNT.
N
[ 00]
0.0
The value between square brackets shows the de-
counter that will display the message once reached
"00". When only 5 capsules are required to reach
the set-up threshold, the vending machine will show
the message "empty the capsule drawer.
Once reached the set-up threshold, the opera-
tion of the machine will be inhibited until the
capsule drawer is emptied .
N
Dispensing cycles before having to replace the
0
cartridge of the external filter, if any. As soon as
500 dispensing cycles are left, the display will show
"change water filter" and as soon as the decounter
has reached 0, it will display "out of service water
filter", thus inhibiting the operation of the machine.
H2O FILTER DECOUN.
N
[000]
It sets the minimum time necessary (in seconds) to
empty the capsule drawer and the drip tray; below
the set-up value, the vending machine will not reset
the full drawer message.
MINIM. TIME RESET
DRAWER CAPS
EMPTY CAPSULE
DRAWER
0.0
RESET DRAWER
CAPSULE COUNTER
00
0.0

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Magystra LB 2600 INT and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Magystra lb 2600 menaMagystra lb 2600 aus

Table of Contents

Save PDF