Coffee Dose Programming - LAVAZZA JOLIE & MILK Operating Instructions Manual

EN I T

COFFEE DOSE PROGRAMMING

Measures are always programmed using the same button;
any other buttons are ignored. The programmed amount
of brewed coffee can be changed by repeating the pro-
gramming.
Lift the pod loading lever until it locks into position to
open the pod fitting compartment.
Put a Lavazza
ting compartment.
Lower the pod loading lever to close the pod fitting
compartment.
PROGRAMMING THE MACCHINE
capsule into the capsule fit-
Press and hold one of the two coffee delivery buttons
for at least 3 seconds. The selected key will flash and the
coffee machine will enter the programming mode.
>
3
Once the desired amount of coffee has been obtained,
stop supply by releasing the button.
If the programmed measure exceeds the maximum al-
lowed 8.8 fl oz (250 cc) the machine will automatically
stop delivery, the delivery button will blink and the last
programmed measure will be saved in the memory.
If there is a power failure during programming, the last
programmed value remains in the memory.
If during a dose programming, water lack is indicated, the
machine stops the supply and the dose being programmed
won't be saved.
Once filled the water tank, repeat the dose programming
procedure.
50
SEC