LAVAZZA Magystra LB 2600 INT Installation And Maintenance Manual page 35

At the back of the product canister turn the black
ring nut clockwise and remove it. Extract the worm
screw by pulling the black bush. To facilitate disas-
sembly, push the stirring wheel in the correct direc-
tion.
Lift the two fastening clips (one for each side) from
the inside of the product canister and remove the
two red plugs from the outside. Remove the stirring
wheel. Wash the disassembled parts with plenty of
lukewarm water.
MAINTENANCE AND CLEANING
To replace the product motor follow the procedure
below:
Close the faces, remove the product containers, ac-
cess the rear side of the machine.
Extract the two small electric cables from the motor,
hold the body, push it to the bottom to release it
from the bayonet connection of the structure.
The power supply wires can be removed without any
tool.
Observe the polarities .
EN
35