Preparing The Machine; First Power-On - LAVAZZA Magystra LB 2600 INT Installation And Maintenance Manual

FIRST POWER-ON

Press the main switch and put it in position [ON].
The display will show the machine is turned on.
Arrange a cup beneath the nozzles.
Open the dispenser door by unlocking the lock with
the proper key.
Whenever you open the door, a special switch will
power off the electric installation of the equipment.
Fit the service key into the door switch to power the sys-
tem.
The vending machine is supplied and running to
all effects . The mobile parts of the coffee group
will be handled; act extremely carefully .

PREPARING THE MACHINE

The start-up test messages appear on the display in
a sequence:
LB2600 REV.1.17
04-03-2016
TEST
LAVAZZA
TEST
CHECK COFFEE
BREWER
REFILL
WATER
Lift the top cover and remove the water tank up-
wards, using the proper handle.
Rinse the tank before use. Fill the water tank using
only non carbonated fresh drinking water.
A red float inside the tank indicates the maximum
filling level .
EN
15