Installation Precautions; Connecting The Communication Cable - Sega AFTER BURNER CLIMAX Owner's Manual

7.1.1

INSTALLATION PRECAUTIONS.

Ensure that the machines are installed with 70cm between them to allow players to get in and out of the
machines.
(Actual machines may differ slightly from the illustration).

7.1.2 CONNECTING THE COMMUNICATION CABLE

Link machines for network play by connecting the Communication Cable to the HUB of each linked
machine.
1. On each machine to be linked, turn off the
power and disconnect the IEC lead
2. Remove the 4 machine screws which secure
the lower rear cover.
3. Feed the Lan cable from one machine to
another using the access hole in the AC BKT.
4. Once connections have been established, re-fit
access place and rear cover.
76